LG LT600P Refrigerator Water Filter 3 Pack

The LG LT600P refrigerator water filter 3 pack provides three replacement cartridges for compatible LG refrigerators with built-in water and ice dispensers. Each LG LT600P water filter has a rated capacity of 300 gallons and a recommended replacement interval of around six months. This multi-pack helps you keep replacement cartridges available for routine refrigerator maintenance.

Product Details

• Product Name: LG LT600P Refrigerator Water Filter 3 Pack
• Model Number: LT600P
• Part Numbers: 5231JA2006A and 5231JA2006F
• Package Quantity: 3 filter cartridges
• Rated Capacity: 300 gallons per cartridge
• Recommended Replacement: Approximately every 6 months per cartridge
• Rated Flow Rate: 0.5 gallons per minute
• Filtration Standards: NSF/ANSI 42 and NSF/ANSI 53 for specified reduction claims
• Application: Refrigerator drinking water and ice
• Installation: Twist-in cartridge

Special Features

Three Cartridges for Routine Maintenance

The LG LT600P refrigerator water filter 3 pack contains three cartridges for successive filter changes. Keep unused cartridges sealed until needed and follow the storage instructions on the packaging.

Helps Reduce Chlorine Taste and Odour

Each LG LT600P water filter helps reduce chlorine taste and odour in water used for drinking and ice. The LT600P replacement filter also has a listed claim for nominal particulate Class I reduction under the applicable filtration listing.

300-Gallon Rated Capacity

Every LT600P filter cartridge is rated for 300 gallons of water. Replace each filter at the interval recommended in your refrigerator manual, generally around six months, or sooner if the appliance instructions require it.

Reduction of Selected Contaminants

The LG LT600P refrigerator water filter has specified reduction claims for selected contaminants, including lead, mercury, cysts, atrazine and benzene. These claims apply to the relevant testing conditions and certification listings, rather than every possible water contaminant.

Twist-In Cartridge Design

The LG fridge water filter uses a twist-in design for straightforward replacement in compatible refrigerator models. Follow the appliance instructions to remove the used cartridge, fit the new filter and flush the system before use.

Compatibility

The LT600P replacement filter is intended for compatible LG refrigerator models that specify the LT600P cartridge. Associated part numbers include 5231JA2006A and 5231JA2006F.

Check your refrigerator model number and existing filter code before ordering. Not every LG fridge water filter fits every refrigerator, so confirm compatibility in your appliance manual or the manufacturer's filter guide.

Contaminants It Reduces

When installed in a compatible system and used as directed, the LT600P filter has listed reduction claims for:

• Chlorine taste and odour
• Nominal particulate Class I
• Lead
• Mercury
• Cysts
• Atrazine
• Benzene
• 2,4-D
• Lindane
• Turbidity

These claims apply only to the contaminants and test conditions covered by the relevant certification. The filter does not remove every possible contaminant.

Installation Instructions

1. Check your refrigerator manual to confirm that it uses the LT600P cartridge.
2. Place a container or cloth beneath the filter housing to catch drips.
3. Turn the existing cartridge counterclockwise to release it, then pull it out.
4. Remove the packaging and protective cover from the new filter.
5. Align the cartridge with the housing and push it into position.
6. Turn the cartridge clockwise until it locks securely.
7. Flush the system as directed in your refrigerator manual. The specified procedure may require dispensing approximately 2.5 gallons of water.
8. Reset the filter indicator if your refrigerator has one.
9. Check for leaks and confirm normal water flow before use.