LG LT600P Refrigerator Water Filter 2 Pack

The LG LT600P refrigerator water filter 2 pack includes two replacement cartridges for compatible LG refrigerators with built-in water and ice dispensers. Each LG LT600P water filter has a rated capacity of 300 gallons and a recommended replacement interval of around six months. Keeping a spare cartridge available makes it easier to maintain your refrigerator’s water filtration schedule.

Product Details

• Product Name: LG LT600P Refrigerator Water Filter 2 Pack
• Model Number: LT600P
• Part Numbers: 5231JA2006A and 5231JA2006F
• Package Quantity: 2 filter cartridges
• Rated Capacity: 300 gallons per cartridge
• Recommended Replacement: Approximately every 6 months per cartridge
• Rated Flow Rate: 0.5 gallons per minute
• Filtration Standards: NSF/ANSI 42 and NSF/ANSI 53 for specified reduction claims
• Application: Refrigerator drinking water and ice
• Installation: Twist-in cartridge

Special Features

Two Replacement Cartridges

The LG LT600P refrigerator water filter 2 pack supplies two cartridges for ongoing filter maintenance. Keep the second LT600P replacement filter sealed until it is needed, following the storage guidance on its packaging.

Helps Improve Water Taste

Each LG LT600P water filter helps reduce chlorine taste and odour, supporting better-tasting drinking water and ice. It also has a listed claim for nominal particulate Class I reduction under the applicable filtration listing.

300-Gallon Capacity Per Filter

Each LT600P filter cartridge is rated for 300 gallons. Replace each cartridge approximately every six months, or follow the replacement guidance in your refrigerator manual if it calls for an earlier change.

Reduction of Selected Contaminants

The LG LT600P refrigerator water filter has specified reduction claims for selected contaminants, including lead, mercury, cysts, atrazine and benzene. These claims apply under the relevant test conditions and certification listings.

Convenient Twist-In Design

The LG fridge water filter uses a twist-in cartridge design for straightforward replacement. Follow your appliance manual to remove the used filter, fit the new cartridge and flush the system before drinking the filtered water.

Compatibility

The LT600P replacement filter is intended for compatible LG refrigerator models that specify the LT600P cartridge. Associated part numbers include 5231JA2006A and 5231JA2006F.

Check your refrigerator’s model number and existing cartridge before ordering. Not every LG fridge water filter fits every LG refrigerator, so confirm the required filter code in your appliance manual or the manufacturer’s filter guide.

Contaminants It Reduces

When used in a compatible system and according to the instructions, the LT600P filter has listed reduction claims for:

• Chlorine taste and odour
• Nominal particulate Class I
• Lead
• Mercury
• Cysts
• Atrazine
• Benzene
• 2,4-D
• Lindane
• Turbidity

Reduction claims apply only to the contaminants and conditions covered by the relevant certification. The filter does not remove every possible contaminant.

Installation Instructions

1. Confirm that your refrigerator uses the LT600P cartridge.
2. Place a container or cloth beneath the filter housing to catch any drips.
3. Turn the old cartridge counterclockwise to release it, then pull it out.
4. Remove the packaging and protective cover from the new filter.
5. Align the cartridge with the housing and push it into position.
6. Turn it clockwise until it locks securely.
7. Flush the system according to your refrigerator manual. The specified procedure may require dispensing approximately 2.5 gallons of water.
8. Reset the filter indicator if your refrigerator has one.
9. Check for leaks and confirm normal water flow before use.